READY FOR HONING TUBESMain Material: St52 BK+S (E355 SR) After cold drawing the tubes are subjected to stress relief heat treatment. We offer 2 types of production; * Ready for honing tubes: ID tolerance -0, 2 mm -0,3 mm * Ready for burnishing tubes: ID tolerance -0,6 mm – 0,9 mm Please see H8 Tube sizes. The tubes are cold drawn, heat treated and straightened (1/1000)
Standart Lenght:Hydraulic cylinder tubes ID burnished, H8 seamless stell tubes are for hydraulic cylinders. Standart Lenght: 6m -9 m (tubes upto 14m are available by request ) Diameter: 50 mm to 400 mm Surface Raughness: 0,4 micron – 0,8 micron Inner surfaces of the tubes are oiled for to prevent oxidation six months.
|40x50 mm||50x60 mm||50x65 mm||60x70 mm||60x75 mm||60x80 mm|
|70x80 mm||70x85 mm||70x90 mm||75x90 mm||80x90 mm||80x95 mm||80x100mm||90x105mm||90x110mm|
CIRQUIT PİPES FOR OIL TRANSFERINGMain Materials : St 37.4 seamless stell tubes.
This cirquit pipe has normalized condition after cold drawing. To band is very easy and during the bending they have not cracks bcs of normalized.
|6x1 mm||8x1 mm||10x1 mm|
|10x1.5 mm||12 x 1,5 mm||12 x 2 mm||14 x 1,5mm||14 x 2mm||15 x 15mm||15 x 2mm||16 x 2 mm||18 x 1,5 mm|
|18 x 2 mm||20 x 2 mm||22 x 2 mm||25 x 2 mm||25 x 2,5 mm||28 x 2 mm|
|30 x 3 mm||35 x 3 mm||42 x 3 mm|